How to use Handy baby key programmerto get pin codes

This is an easy instruction on How to use Handy baby key programmer to get pin codes; here pincodes from the key of Hyundai/Kia…

For steps, here you go….

1. Read the key
   2. Get into the car to collect
   3. Decode
   4. When finish , you can see the PIN code on screen.

Note: Handybaby CANNOT support smart key

http://blog.obdexpress.co.uk

TM100 Programmer was updated  to V4.38,new version can edit IDE of PCF7945C(Hitag VAG).

How to edit IDE of PCF7945C(Hitag VAG) 

All in two steps :

1.Select TPReader PCF7945C enter IDE at Chip ID page

2. Click botton "Modify IDE"

Notes:
1.This version includes firmware update .

2.Please DO NOT disconnect PC with TM100 while updating .

Older version update released overview:

2016-9-20 V3.44 released:
1. Add keymaker for Chevrolet Aveo as MY2012. Parts: Immo, IC: 25160, Transponder: PCF7936
2. Fix bugsNotes:  This version includes firmware 1 update. Please DO NOT disconnect PC with TM100 while updating2016-9-14 V3.42 released:

1. Add function for odometer rewrite of CAS4,CAS4+
2. Add function for BMW CAS3+ save ISN
3. Add keymaker for BMW CAS3+ by ISN
4. Fix bugs

TM 100 -------2016-6-24 V3.36     released   

1. Add keymaker for Suzuki Swift, Maruti Swift. Parts: Immobox, IC: 93C86,  Transponder: HITAG2

2. Add new type 24C16 support for Mitsubishi ASX, Outlander

3. Add keyexplorer for Renault Koleos, Megane

4. Bugs fix for ID46 image generator

5. Bugs fix for keymaker Chrysler 300C 9S12, 93C86

6. Bugs fix for keymaker Volvo V40 9S12

7. Bugs fix for keymaker Renault Laguna 95160

8. Bugs fix for keymaker Hyundai Accent 95040

9. Bugs fix for keymaker Renault Espace III HC08

10. Bugs fix for keymaker Hyundai Santa Fe 95P80

11. Bugs fix for write 7-byte CS for VAG

12. Bugs fix for locking Tiris 4E

TM100 Transponder Key Programmer V2.0 Update:

1. MEGAMOS 13 chips added copy function;

2. Fixed: Copy 8C chip error;

3. Fix all ID13 key generation problem;

4. Fixed key generation: Volkswagen module, Gower, security box 93C56 no write startup interface;

5. online activation device. Activation is done automatically when you connect the device;

6. online authorization;

7. Online read Magotan security bytes;

8. Volvo 93C86 online decrypt data;

Note: After upgrading to this version, connection TM100 will be prompted to upgrade the firmware, do not disconnect the device during the upgrade.

ID13 copy methods:

Into the chip to identify, select MEGAMOS 13, the original car keys into the coil, read the data, and then into T5 chip can point to write, generate ID13 chip;

Click here to learn more about TM100 Special functions

How to reset Ford vehicles mileage

Obdstar X300M is the most professional mileage programmer.Using X300 ,odometer adjustment is easy.Here is How to reset Ford vehicles mileage via OBD2 by Obdstar X300 step by step.

Main setup display:

Connect the car ,then open Obdstar X300Moo

VEHICLES

MILEAGE ADJUSTMENT

Choose"FORD"

Operation success

Mileage adjustment

Reading mileage ...

Input the name of file to sane:1230000

Current mileage:70104 KM

Please confirm the mileage correctly and press ENTER to continue.

Please input the mileage of the adjustment

0935200

Then waiting....

 X300M supportsFORD models:

C-MAX

2012

Ecosport

type 1

type 2

Edge

2015-(Big color meter)

Expedition

2007-2010

Explorer

2007-2010

Focus

2013-

2009-(Multifunctional screen)

-2008(Smaller screens)

Fiesta

2013-

type 1

type 2

-2012

Kuga

2012

2010

2012-

Color meter

Monochrome meter

Mondeo

2011-2013

Monochrome screen meter

2 pointer color meter

2007-2010

Monochrome screen meter

4 pointer color meter

Navigator

2007-2010

New Mondeo

Big color meter

Small color meter

Monochrome screen meter

S-MAX

2007-2010

Taurus

2015-(Big color meter)

http://www.mileageprogrammer.com/obdstar-x300-change-mileage-on-ford/

Volvo 88890300 Vocom Interface WiFi Setting Manual

Volvo 88890300 Vocom Interface is a diagnostics application that covers the whole repair process through the use of plug-ins.This device support WIFI connection.

here is how set wifi  connection for Volvo 88890300 Vocom Interface step by step 
1, Use USB cable ,  go to ptt , setting, Communication unit configuration , configure, ‘USB+Directly to Communication unit’
2, ‘Direct’ ->’Restore default values’-‘Apply’-‘Ok’
3, Click Ok again.  then disconnect usb cable,
4, Go to Setting->’Comm.unit Selection’ -. ‘ Communictcation unit 8889300 ….Nickname’

5, Now your can use signal get wireless singal.

some Volvo 88890300 Vocom Interface details:

1.With Volvo 88890300 Vocom Interface you can diagnose, test, calibrate, and program a product. A product could be a vehicle, engine, or a machine.
2.. Volvo 88890300 Vocom Interface provide functions for updating the tool, communication with the product, and other external applications.
The set of plug-ins, user authorizations, and available languages is adjustable to provide every user with what they need.
3.. This device support WIFI connection.

Volvo 88890300 Vocom Software and requirement:
Software version: PTT1.12/2.40,
This software is provided for free. Software CD is in the pacakge. Support Windows XP system only, multi-languages to choose.

Software version: PTT2.03/3.02.
This is latest software version. This software need additional purchase, price is 210EUR. Support professional or ultratme Windows 7 32bit system, multi-languages to choose.

If customer need Renault NG3 NG10 Software, need to buy and activate, cost is 200USD.

Compared with Volvo VCADS 2.4.0, this Vocom has no limit for PCs, support more can bus and K-Line protocol.

Top 4 reasons to choose VOLVO VOCOM:

1) Supporting diagnose, test, calibrate, and program for vehicle, engine or a machine.

2) Support update in the future.

3) Diagnostics application that covers the whole repair process through the use of plug-ins

4) Adjustable plug-ins, user authorizations, and available languages meet needs for different users 

http://www.obd2express.co.uk/

VECO ELTRAC EASY Diagnostic Kit for Trucks and Heavy Vehicles With Software

VECO ELTRAC EASY released at obdexpress.co.uk ,IVECO Eltrac Easy Diagnostic kit – allows simple diagnosis of the various electronic control units on the vehicle, using a communications module (ECI). E.A.SY. software interface is designed to facilitate access to tools, view functions and make diagnostic procedures clear and adaptable to various needs. The software for the E.A.SY platform provides a single, intuitive interface, through which it is possible to consult a guide to repairs organised by symptom.

Picture display:

IVECO Eltrac Easy Diagnostic kit  Description:

Iveco EASY (Eltrac) Bluetooth module enables wireless connection between vehicle and diagnostic computer it simplifies all service and repair operations in workshops. Fast and very accurate error detection, identification and correction is what every Iveco workshop need every day. The Bluetooth module is heavy-duty ready. It is a reliable solution that currently is used almost all Iveco workshops and services. This is the only and best ever diagnostic tool for Iveco heavy vehicles.

IVECO Eltrac Easy Diagnostic kit  Features:

• Make active ECU diagnostic;
• Make parameter programming;
• Perform engine tests;
• View wiring diagrams.
 
IVECO Eltrac Easy Diagnostic kit Parameters:

Dimension: 175x75x30 mm
Power supply: 6-32V
Connection interfaces: USB and RS232 standard, Bluetooth (optional)
Compatible software:  Iveco E.A.SY. 11.1
IVECO Eltrac Easy Supported languages: Italian, Spanish, French, English, German, Czech, Danish, Hungarian, Dutch, Swedish, Finnish, Portuguese, Polish, Turkish, Croatian, Greek, Russian, Korean
For advanced parameter programming you can use our Iveco AlphaNumeric Code Calculator software.

IVECO Eltrac Easy Diagnostic kit Supported brands:
 
• ASTRA Full
• CNH Full
• DVD_EUROCARGO_FPS
• DVD_LMV
• DVD_LMV_VM90
• DVD_LMV_VM90_RG12
• DVD_MG410
• DVD_MG410_MPV
• DVD_MG410_MPV_EUROCARGO_FPS
• DVD_MPV
• EBU Full
• EDT
• Fpt Fsl
• Fpt Multicar Eol
• Fpt Sor Eol
• Iveco Astra Belgium
• Iveco Astra Pacific
• Iveco Astra Spain
• IRISBUS Full
• IRISBUS Solo Mini
• Iveco Daily
• Iveco Full
• Iveco Leggeri
• Iveco Medi
• Iveco Pesanti
• Iveco- SCA Full
• Iv Motors Full
• Maserab Full
• Power Tech
• System Full
• SIH Full
• SWISSARMY Full
• Tata-Daewoo Full

source:http://www.obdexpress.co.uk/wholesale/iveco-eltrac-easy-diagnostic-kit-trucks-heavy.html 

How to use TM100 edit IDE of PCF7945C(Hitag VAG)

TM100 Programmer was updated  to V4.38,new version can edit IDE of PCF7945C(Hitag VAG).

How to edit IDE of PCF7945C(Hitag VAG) 

All in two steps :

1.Select TPReader PCF7945C enter IDE at Chip ID page

2. Click botton "Modify IDE"

Notes:
1.This version includes firmware update .

2.Please DO NOT disconnect PC with TM100 while updating .

Older version update released overview:

2016-9-20 V3.44 released:
1. Add keymaker for Chevrolet Aveo as MY2012. Parts: Immo, IC: 25160, Transponder: PCF7936
2. Fix bugsNotes:  This version includes firmware 1 update. Please DO NOT disconnect PC with TM100 while updating2016-9-14 V3.42 released:

1. Add function for odometer rewrite of CAS4,CAS4+
2. Add function for BMW CAS3+ save ISN
3. Add keymaker for BMW CAS3+ by ISN
4. Fix bugs

TM 100 -------2016-6-24 V3.36     released   

1. Add keymaker for Suzuki Swift, Maruti Swift. Parts: Immobox, IC: 93C86,  Transponder: HITAG2

2. Add new type 24C16 support for Mitsubishi ASX, Outlander

3. Add keyexplorer for Renault Koleos, Megane

4. Bugs fix for ID46 image generator

5. Bugs fix for keymaker Chrysler 300C 9S12, 93C86

6. Bugs fix for keymaker Volvo V40 9S12

7. Bugs fix for keymaker Renault Laguna 95160

8. Bugs fix for keymaker Hyundai Accent 95040

9. Bugs fix for keymaker Renault Espace III HC08

10. Bugs fix for keymaker Hyundai Santa Fe 95P80

11. Bugs fix for write 7-byte CS for VAG

12. Bugs fix for locking Tiris 4E

TM100 Transponder Key Programmer V2.0 Update:

1. MEGAMOS 13 chips added copy function;

2. Fixed: Copy 8C chip error;

3. Fix all ID13 key generation problem;

4. Fixed key generation: Volkswagen module, Gower, security box 93C56 no write startup interface;

5. online activation device. Activation is done automatically when you connect the device;

6. online authorization;

7. Online read Magotan security bytes;

8. Volvo 93C86 online decrypt data;

Note: After upgrading to this version, connection TM100 will be prompted to upgrade the firmware, do not disconnect the device during the upgrade.

ID13 copy methods:

Into the chip to identify, select MEGAMOS 13, the original car keys into the coil, read the data, and then into T5 chip can point to write, generate ID13 chip;

Click here to learn more about TM100 Special functions

Best mileage correction tool for 2000-2014 BMW CAS

Digimaster 3 is the best mileage correction programmer for BMW CAS 2000-2014
Now we share a 2000-2014 BMW CAS models list on mileage correction and key programming,follow the list, you can check the corresponding CAS modules.

Digimaster 3: 2000-2014 BMW CAS models
BMW Car Model	CAS1 912DG128 (3K91D)	CAS2 9S12DG256 (2K79X)	CAS3 9S12DG256 (0L01Y)	CAS3+ 9S12XDP512 (0L15Y)	CAS4 9S12XDP512 (1L15Y) 9S12XEP100 (5M48H)	FEM
BMW 1 Series		2004-2006 (E87)	2007(E87)	2008-2011 (E87)		2012-2014 (F20)
BMW 3 Series		2005-2006 (E90)	2007(E90)	2008-2012 (E90)		2013-2014 （F30/F35）
BMW 5 Series		2004-2006 (E60)	2007(E60)	2008-2010 (E60)	2010-2014 （F07/F10/F11/F18）	Not available yet
BMW 6 Series		2004-2007 (E63/E64)	2008(E63/E64)	2009-2010 (E63/E64)	2011-2013 (F12/F13)	Not available yet
BMW 7 Series	2001-2004 (E65)	2004-2008 (E66)			2009-2013 (F01/F02)	Not available yet
BMW X1 Series				2010-2014 (E84)		Not available yet
BMW X3 Series					2011-2013 (F25）	Not available yet
BMW X5 Series			2007(E70)	2008-2013 (E70)		2014（F15）
BMW X6 Series				2008-2014 (E71)	Not available yet	Not available yet
BMW Z4 Series				2010-2013 (E89)	Not available yet	Not available yet
Remark	Mileage Correction: support, process CAS via OBD or BDM (wiring), need to remove the board and solder to it and program it.Key programming: Support, via OBD or BDM (wiring)	Mileage Correction: support,process CAS via BDM (wiring), need to remove the dashboard. Key programming: Support, via BDM (wiring)	Mileage Correction: support, process CAS via OBD or BDM (wiring), need to remove the board and solder to it and program it.Key programming: Support, via OBD or BDM (wiring)	Mileage Correction: support, process CAS via OBD or BDM (wiring), need to remove the dashboard and solder to it and program it. Key programming: Support, via OBD or BDM (wiring). So far you can only program CAS3+ key via OBD.	Mileage Correction: support, process CAS via BDM (wiring), need to remove the dashboard. Key programming: Support, via BDM (wiring). It supports up to 06/30/2016, after 06/30/2016 it is CAS4+ and it doesn’t support. For the CAS system after 2010, it comes with cpu of 5M48H.	Mileage Correction: support, process via adding FEM filter, one way is to directly add to the FEM module and another way is to add to the back of dashboard. Key programming: Not Support

This article is from :http://www.mileageprogrammer.com/do-odometer-correction-on-bmw/