China Key Programmer

Chinese car engine anti-theft system is standard, equipped with anti-theft system are:
A master key (red)
Two vice key (black)
An emergency start card.
First, the key programming:
The user must provide the master key, or can not be programmed.
After successful programming, only the key code anti-theft system with memory processes.
When a user loses or 两把 vice key, security systems need to be reprogrammed, the purpose of the control box has been lost in the memory of the electronic key code erase (overwrite) away.
The actual process of programming the controller and the engine ECU code reading key electronic process. Chinese cars can be equipped with up to two vice-key.
A, pre-programmed, be sure to CN900 Key Programmer ensure that at least 30 seconds preset time, that is in the OFF state for at least 30 seconds.
B, control box time required to read the chip code less than 3 seconds, you also need to ensure that a minimum time of 1 second. Both in the ON state for 1 - 3 seconds.
C, the programming process, two key intervals of not more than 15 seconds. That clump this key under a key to OFF to ON state intervals of not more than 15 seconds. User programming process must strictly comply with the time requirements, the program failed was found.
Chinese car remote replication setup and key
1 reset method
(1) with a key to the ignition switch to the ON position.
(2) topical another key in the car door locked.
(3) At this point any Car HUD security key interior, pressed twice on the remote control, interior lights off, complete the setup.
   Note: The above operation must be completed within 30s must have when setting two keys, and have an assistant to help.
2 key replication method
(1) would be the red master key into the ignition switch and the ignition switch to the ON position, turn off the ignition switch in the 3s, remove the key.
(2) would be black vice key into the ignition and the ignition switch to the ON position, turn off the ignition switch in the 3s, remove the key.
(3) Copy the few to repeat (2) several times. Up to three.
(4) Turn on the ignition switch with red master key, turn the ignition switch in the 3s.
http://www.eobdii.fr/ucandas-wireless-automotive-diagnosis-system-3312.html