Change mileage in EDC16 ECU in 2005 Audi A4 b7,which tool can use?

Here is some several pieces of working odometer correction tool in EDC16 ECU in 2005 Audi A4 b7  for based real user's experience,Thanks all  experience from mhhauto.com  forum member.

car modele and year:

EDC16 ECU in 2005 Audi A4 2.0TDI 140cv

Objective:

Change the mileage

Tools options:

NO1:Carprog Full v9.31/ v8.21 tested ok .

NO2:VAG DASH CAN 5.29

Note :i would recommend you to not open ecu or you will damage it .you need to have experience to do do that ,get vag dash can 5.29 and you will finish the job.

NO3: BDM100 ECU Programmer

Safe way to open and do the job with BDM ,Older version could fail with your ecu.Tt is hard to damage EDC 16 during opening when you are a little bit careful,you don't have to lift PCB,only remove the cover .Not the hard way like MB EDC 16.

NO4:Cheap V4.94 Digiprog III Digiprog 3 Odometer Programmer with OBD2 Cable

So finally i've opened the ECU (sick job hahah) and desoldered the S95320 eeprom for reading with digiprog clone. It's seems to read it fine.

I think ill make another post from opening the ECU to guide the people that have to do that.

This article is from :http://www.mileageprogrammer.com/change-mileage-in-edc16-ecu-in-2005-audi-a4-b7/

Digimaster III Odometer Correction Tool

Digimaster III  is professional mileage adjustment programmer and the best-salling Products on obd2express.

Here are some picture shows  Digimaster 3 Main Function,workable market and cars overview.

What Digimaster III can do:

Odometer correction
Audio decoding
Airbage reset
ECU programming
PIN Code Reading
BMW key programming



Digimaster 3 workable market and cars:

Europe, America, Japan and Korea, Motor and Engineering truck

Digimaster 3 supportted European car list

Alfa,Aston Martin,Audi,Bentley,Benz,BWM,Citroen,FTAT,Ferrari,Jaguar,Lambaorghini,Lancia,Lotus,Man,Opel,Peugeot,Porsche,Volvo,Volkswagen,Rover,Saad,Skoda,Truck,Forkman,maserati.

Digimaster 3 supportted American car list

Cadilac,Chrysler,Ford,GM,Lincoin.

Digimaster 3 supportted Japanese and Korean car list

Daihatsu,Honda,Hyundai,ISUZU,KIA,Lexus,Mazda,Mitsubishi,Nissan,Proton,SSangYong ,Subaru,SUZUKI,Toyota.

Digimaster 3 IMMO code reader car list

Digimaster iii program keys for Mercedes Benz and support models

Digimaster iii make key for BMW and workable immobilizer type, D3 program ECU for BMW and
supported chip type

Digimaster iii-please select the operation type: File, IC Read, CPU Program and Signal Generator

Digimaster iii Dgiagnostic port read code

Digimaster iii support Motor type

http://www.mileageprogrammer.com/digimaster-3-digimaster-iii-odometer-correction-tool/

Using Xhorse VAG KM+IMMO Tool program VAG group VW Audi Skoda Seat keys

VAG KM+IMMO tool Supports odometer correction, PIN code read, EEPROM read/write by OBD2,Vehicle support:Volswagen ,seat and Skoda cars from year 2006,The latest version:V1.8.2.

A

Here we will introduce VAG KM+IMMO Tool  in two parts：

part 1.  How to program VAG group VW Audi Skoda Seat keys using Xhorse VAG KM+IMMO Tool OBD2 cable when all keys are lost.

part 2.VAG KM+IMMO Tool VAG key programmer & mileage programmer car list:

part 1:

Here is the procedure of new keys programming by VAG KM+IMMO OBDII Tool:

1) Connect “VAG KM+IMMO Tool” to both pc and car.

2) Click “Service Mode” button to open “Service Mode” dialog.

A

3) Remove the 24C32 chip from instrument, read 24C32 EEPROM data with programmer, and save EEPROM.

4) Switch to “Service Mode” dialog, load EEPROM.

5) Save special EEPROM, write data to 24C32 EEPROM back to the chip,

and install chip back in instrument.

6) Save KEY file.

7) Login with the key file.

8) Click “Write” button to write back the original EEPROM (via OBDII).

9) Close “Service Mode” dialog, start adding dealer key (Click “Dealer Key” button, open “Dealer key” dialog.)

Note: Before the process is complete, keep the PC and device connected with vehicle, do NOT disconnect. If you interrupt, you

need to re-start from the first step.

part 2 :

VAG KM+IMMO Tool VAG key programmer & mileage programmer car list:

CDC32xx Module Options:

Golf, Golf+ from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

odometer correction, PIN code read, EEPROM read/write;

Passat B6 from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

EEPROM read/write;

Bora, Jetta from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

odometer correction, PIN code read, EEPROM read/write;

Touran from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

odometer correction, PIN code read, EEPROM read/write;

Caddy from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

odometer correction, PIN code read, EEPROM read/write;

Tiguan, Eos from year 2008+: odometer correction, PIN code read, EEPROM read/write;

Octavia (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

odometer correction, PIN code read, EEPROM read/write

NEC 24C32 Module Options:

VW Golf 6 – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

VW Passat , Passat CC – 2009+ with NEC and 24C32 EEPROM – odometer programming by OBDII;

VW Tiguan – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

VW T5 – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

VW Polo – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Skoda Octavia 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Skoda SuperB – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Skoda Roomster, Yeti – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Seat Ibiza – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

VW Multivan – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

VW EOS – 2009+ with NEC and 24C32 EEPROM – odometer programming by OBDII;

VW Caddy – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

VW Scirocco – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

VW Bora – 2010+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

VW Jetta – 2010+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Skoda Fabia 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Skoda Altea – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Skoda Yeti – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Skoda Altea – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

Skoda Exeo – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read by OBDII;

GOLF6 MM7 Module Options:

VW Golf 6 – 2010 with MM7 (9S12) EEPROM – odometer programming and immobiliser data read by OBDII;

VW Tiguan – 2010+ with MM7 (9S12) EEPROM – odometer programming and immobiliser data read by OBDII;

Enjoy!!!

This article is from:http://www.mileageprogrammer.com/vag-km-immo-tool/

UPA USB V1.3.0.14 “usb device not recognized” how to do ?

Customer puzzle:

Does someone has dump for 24lc128 eeprom v1.3r2? My UUSP upa was working fine, and today it say’s usb device not recognized, I try with dump from v1.2 but working only one time after disconnect and connect again same usb device not recognized.

solution from obdexpress.co.uk engineer：

Here is dump from upa version 1.3 – for 24c128
https://mega.nz/#!To9VXBYI!l1TpfyO2GWQUUZmP2YqwANvhGEv3HjUQIuQa8Cux8jQ

If the eeprom dump works well at the first time, but after UPA USB V1.3.0.14 disconnects and reconnects again, it shows usb device does not recognize again. You should try one of these two solutions:

1). You should fill eeprom with FF. After connecting  it, it will ask you to update eeprom. You should update and  it will work well.
2). You need to change this N15. N15 is fuse, value about 0R.

Related post:How to get UPA USB programmer v1.2 work with UPA-USB v1.3 software

This article is from：http://blog.obdexpress.co.uk/2016/11/01/upa-usb-v1-3-0-14-usb-device-not-recognized/

Step Guide change AUDI A4 KM On VAG K+CAN

Super vag k+can plus 2.0 is a comprehensive diagnostic tool, which can odometer correction, read Security Access Code, key programmer, airbag reset tool  ect ,today ,we share you how to use odometer correction on Super vag k+can plus 2.

Here is Super VAG K+CAN Plus 2.0  Odometer Adjust Operation Instructions,Take Audi a4 RB4  as an example
1.Access to the main menu, select [Odometer Adjust] key, press OK Keys, appear
menu options.

2.According to the type of odometer, select the corresponding option. Maily odometer is
divided into K line and CAN line, but the K line and CAN have different manufacturers,
different versions, different types of odometer. User can choose K-line or CAN line
automatic way, for some special odometer, user select the corresponding instrument
through the menu.
3.Select the corresponding instrument, press OK key, the following information will
appear:

4.When appear the version information, press any key, it will appear:

Old KM :50000

New KM:500

Note: Some instruments, need to manually enter the old mileage, and some instruments
can be directly read the mileage. If the mileage can not automatically read the meter,
enter the current mileage meter, for example, the A6L Marelli instrument which is CAN
interface, need to manually enter the old mileage.
5.Enter new miles, press OK button, the equipment began to update the dashboard,
after update successful, the below information is shown on the screen:

Note: After Odometer adjustment is successful, device will automatically reset instruments.
After that, some instruments need to disconnect the fuse, and then re-power. Set correct
date and time before we can work,for example: the audi a4 RB4, RB8 instruments, if not
do that, it will appear the symptoms, can’t ignition.
6.Press any key to return to the menu .

Obdstar F108 VS obdstar F108+

This is comparison of two OBDSTAR F108 OBDSTAR F108+ PSA PIN Code Reader Key Programming Tool.

Obdstar f108+ improves a lot in PCB design and adds a few components.
--> K line issues solved! pre-2008 cars OK!!

now this PSA key programmer works not only on pre-2008 K-line cars but also post-2008 new CAN BUS cars.

Obdstar F108+ Vehicles tested ok:

the Peugeot, Citroen and DS car list includes all new and old models tested without any issues.

PEUGEOT

Select from vehicle

Africa

206(VF32)

BSI2 Asia

China

Immobiliser

206 207

Type 1 Type 2 2008 3008 301 307

Type 1 Type 2 308 308S 4007 407 408 508 807 Remote Smart key system

508 Replace engine ECU Other

207CC(VF3W) 407(VF36) 508

Proximity Partner

-2008

BSI2 2008-

PSA CAN system Euro

106(VF31) 1007(VF3PM)

2005-2014 1007(VF3K)

2003-2005 2005-2007 2007- 206(VF32)

BSI1(46 chip) 207(VF3W) 208(VF3C) 2008(VF3C) 306(VF37)

Immobiliser CPH 307(VF33)

BSI1 PSA CAN system 308

2007-2013(VF34) 2013-(VF3L)

Non Proximity 3008(VF30)

PSA CAN system 406(VF37) CPH1 406(VF38)

BSI2 BSI3 BSI4(46 chip) 406 double seat CPH1 407(VF36) 4007(VF3V)

Gas

Proximity Non Proximity Diesel 508(VF38)

Proximity Non Proximity 5008(VF30) 607(VF39) -2005

BSI2 2005- 806(VF3A)

Immobiliser2

CPH 807(VF3E)

BSI1 PSA CAN system Expert(VF3X)

//Immobiliser1//3&8 Immobiliser2 Immobiliser3 CPH 2007- Partner(VF3G/VF35)

Immobiliser1 Immobiliser2 BSI1 BSI2 CPH Partner(VF37)

PSA CAN system Ranch

//Immobiliser1Immobiliser1//3&8 Immobiliser2 Rcz(VF34) PSA CAN system South America

206 207

2008- 208(VF3C) 308

2011- 3008 407(VF36D) 408 508(VF38)

Proximity Select from type Immobiliser Type 1 Type 2 Type 3 Type 4 Type 5 Type 6 Remote

Smart key system

Type 1 Replace engine ECU Read security code CITROEN

Select from vehicle

Africa

C2(VF7J) Asia

Immobiliser C2

Type 1 Type 2 C3

C3 C3-XR C4 C5 C6 C8 Elysee[ELYSEE] New Elysee Picasso[PICASSO] Thiomphe[TRIOMPHE] C-CROSSER C-Quatre Remote Smart key system

C4 L Replace engine ECU Euro

Berlingo(VF7M)

Immobiliser1 Immobiliser2 BSI1 BSI2 CPH Berlingo(VF7G) BSI1 Immobiliser3 Berlingo3(VF77) C-Crosser(VF7V)

Gas

Proximity

Non Proximity Diesel C1(VF7P) C2(VF7J)

Type 1 Type 2 C3(VF7F)

-2006 2006- C3 Aircross 2006- C3 Picasso(VF7S) C3 PLURIEL

2002- C4(VF7L/U) C4(VF7N)

Proximity Non Proximity C5(VF7D) BSI1 BSI2 BSI3 C5(VF7R)

Type 1 Type 2 Type 3 C6(VF7T) C8(VF7E)

Type 1 Type 2 Dispatch(VF7B)

CPH Immobiliser1 Immobiliser2 Immobiliser3 Dispatch(VF7X) Evasion

CPH Immobiliser1 Immobiliser2 Jumpy(VF7B) CPH Immobiliser1 Immobiliser2

Immobiliser3 Jumpy(VF7X) Nemo(VF7A)

Type 1 Type 2 Relay Relay2

Immobiliser Relay3(VF3Y) Saxo(VF75)

Immobiliser1 Synergie

CPH Immobiliser1 Immobiliser2 Xantia(VF7X)

CPH Immobiliser1 Immobiliser2 Xsara(VF7N)

CPH BSI1 BSI2 BSI3 Xsara PIC(VF7C)

BSI1 BSI2 South America

C3

2003-2013 2014- Select from type Immobiliser Type 1 Type 2 Type 3 Type 4 Type 5 Remote Smart key system

Type 1 Replace engine ECU Read security code DS

Select from vehicle

Asia

Immobiliser

DS5 Remote Smart key system Euro

DS3(VF7S) DS4(VF7N)

Proximity Non Proximity DS5(VF7KF)

CPH Immobiliser1 Immobiliser2 Select from type Immobiliser Type 1 Type 2 Type 3 Type 4 Type 5 Remote Smart key system

Type 1 Read security code

Software update

Via official website : www.obdstar.com,Free update for 1 year

Language

English

Features

1. Key programming + PINCODE read;

English Version Packing List

1. F108+ main unit;

2. TF Card

Which tool can change VW polo 2010 mileage

A puzzle from our customer :I am looking for a odometer correction tool for my 2 cars. VW lupo , year 2000. And for VW polo , year 2010.  USA PROG  can do it? or which is the best one for this two cars?

Suggetion:

USA PROG  can do  odometer correction on VW lupo 2000 and VW polo 2010,and this tool at obd2express.co.uk is Original.

But You also can choose digimaster 3. Digimaster 3 is the one can work on your this two cars. Also your two cars is in the range of digiprog 3. But digimaster 3 is better than digiprog 3. This two price is much lower than usa prog. Digimaster 3 is original too.

Let us know more their！

*USA PROG （Best quality，best  for USA cars）

USA PROG is the best mileage correction tool for USA cars.Write and make odometer corrections and read immo code by OBD2 port on almost all supported vehicles.

Supported vehicle list:

Chrysler, Dodge, Jeep, GM, Chevrolet, Ford, Lincoln, with bonus VW (Volkswagen), Audi, Skoda, Seat, Honda, Harley, Izuzu, Lexus, Mazda, Mitsubishi, Nissan, Porsche, Subaru, Suzuki, Toyota, Yamaha, vehicles.

Item picture:

*Digimaster 3:

Digimaster 3 also is called Digimaster III or shortly D3 is new developed odometer correction master. It works with various types of adapter you can easily achieve odometer correction, Audio decoding, airbag resetting, engine ECU resetting, IMMO, programming key for Benz &BMW etc.

Odometer correction vehicle including cars from European, American, Japanese and Korea. Detail list as follows:

Alfa Cadillac Daihatsu Aston Martin Chrysler Honda Audi Ford Hyundai Bentley GM ISUZU BMW Lincoln KIA Benz Lexus Citroen Mazda FIAT Mitsubishi Ferrari Nissan Jaguar Proton Lamborghini SSangYong
Lancia Subaru Lotus SUZUKI Man Toyota Opel peugeot Porsche
Renault Rover Saab Skoda Volvo Volkswagen Wiesmann
Truck Forkman Maserati
Othe vehicle Motorcycle Truck

New added car models for odometer adjustment,airbag resetting,writing Benz BE(NEC) key and VW Immo function.

New added car models for airbag resetting:
1 Mazda SA10-57-K30M1
2 Mazda SA11-57-K30M1
3 KIA Sportage R 95910-4T000

New added car models for odometer adjustment:
1 SSangYong Korando 93C66
2 Ford Focus 2010
3 Opel Astra DIAG 2009-  (Only Available for Test user)
4 Benz(OBD) A Class W176
5 Benz(OBD) B Class W246
6 Benz(OBD) CLA Class W117
7 Benz(OBD) ML Class W166
8 Benz(OBD) SL Class R231
9 Benz(OBD) SLK Class R172
10 Volvo(OBD) XC60 2008-
11 Skoda(OBD) Superb 2008-
12 Ford(OBD) Mondeo 2008-
13 GM(OBD) Chevrolet Aveo (Only Available for Test user)
14 Audi(OBD) A1  -2013(Only Available for Test user)
15 Audi(OBD) Q3 -2013(Only Available for Test user)

Click here to see :Digimaster 3 supported detailed vehicle list

Item picture:

*Digiprog 3:

Digiprog3 is a cost-effective mileage correction tool, which supports multi-language and full range of vehicle.

 Feature:

1. Power-On Password:1

2. Newest Version: V4.94

3. Supported Languages: Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands.

4. Worldwide leader in digital speedo programming and correction software.

5. Quality standards are second to none.

6.Years of experience in digital vehicle engineering.

7. Professional technical service.

Service Interval Adjustments and Settings

Assyst processing

Fault memory read-erase

EEPROM programmer

Integrated PC communication

Newest version :V4.94

V4.94 Add Model List:
Audi :
-A3 new version
Ford :
-F150 24C16
-Falcon 24c02
Mercedes :
-W176 new version
-W204 new version Diag
-w212 new version Diag
Opel :
-Insignia new version
-Astra new version

Digiprog3 car list

Item picture:

source:http://www.mileageprogrammer.com/do-mileage-adjustment-on-vw-lupovw-polo/