Which Tactrix Openport cable should you get?

Which openport cable should you get and what the difference among openport 2.0, 1.3R, 1.3U etc?

1) Openport 2.0 is able to read / flash Subaru CAN BUS ECUs (generally 08+ Impreza 2.5i / WRX / STi and 07+ Legacy / Outback 2.5i / GT, Forester 2.5 / XT, Tribeca). Openport V1.3 can not support CAN Bus 2008-2020 Vehicles communications.

2) Openport standard J2534 Pass Thru supports as well as additional protocol support which could allow for independent developer to create software to read / flash / log vehicles other than Subaru and Mitsubishis.

3) With the V2.0 you have the ability to do remote data logging with a built-in mini Micro SD card. Standalone data logging to SD card allows you to log without a laptop. While V1.3 can not log data for some vehicle models, like Diesel vehicles, Mitsubishi Evo1-3, can not reset airbag SRS etc.

4) Openport 2.0 is capable of logging supports Innocate MTS devices, like Zeitronix ZT2 / ZT3 or AEM UEGO via the built-in 2.5mm stereo plug data bus.

5) Openport 2.0 is possible to work with other OBD2 diagnostic software like ECUflash software program. 1.3R and 1.3U do not work ECUflash software but openport 2.0 could.

Free download V1.44 ECUflash
http://ecuflash.software.informer.com/

6) Field upgradeable firmware allows users to update Openport 2.0for new features

In short:
Older version Openport, like 1.3R, 1.3U used better for reading / flashing select non-CANbus Subaru ECUs. But Openport 2.0 is possible to read / flash newer CAN Bus Subaru ECUs (08+ Impreza and 07+ Legacy / Outback / Forester / Tribeca) as well as other new features. All versions of the OpenPort cable have the capability to log ANY modern Subaru.

NOTE:
The table displays the vehicle model and year capability that different versions of Openport are engaged

Tactrix Openport 2.0 with additional ECUflash software program is available in aobd2shop for an unbeatable price $ 79.9.

2 Best-sold Versions of CK-100 Key Programmer on Aobd2shop

Whether V45.02 or V99.99 is the new generation of the old SBB key programmer, both of which are regarded the replacement of old one.

Therefore, here come to these two newer versions of CK-100 auto key programmer.

CK-100 Key Programmer V99.99 is the newest SBB key programmer supporting multi-language Much more functions than SBB key programmer, also add more models that can be referred as follows.:

http://www.aobd2shop.com/upload/pro/ck-100-key-programmer-car-list.pdf

Features:

1. Newest Version: V99.99

2. This CK100 is only with 1024 tokens

3. Support Language: English, Italian, Dutch, French, Spanish, Portuguese and Turkish.

4. Better than SBB, same functions with CK-100 Key Programmer V45.02, but cheaper than CK100 Key Programmer V45.02.

CK-100 key programmer V45.02 is a new generation of the SBB Key Programmer Not only has the advantage of the SBB V33.02 CK-100 also increases much more features and functions Here attached its support car models below...:

http://www.aobd2shop.com/upload/pro/ck-100-v45.02-auto-key-programmer-car-list.pdf

Features:

1. More powerful and functional.

2. Add more models.

3. High quality

4. CK100 Key Programmer is more easy to use, it has no CD in the package, you can use the software which is ready to install in the device.

Note:

When using if ck-100 key programmer fails to adapt key, then disconnected OBD16 adapter and car connection, after 10 seconds connect again, otherwise vehicle IMMO system may damaged, CK-100 locked.

2015 New Arrival Easycoding for BMW and Rolls-Royce Diagnose and Vehicle Personalized Setting

2015 New Arrival Easycoding for BMW and Rolls-Royce Diagnose and Vehicle Personalized Setting

Key Programming via IKEYCUTTER CONDOR XC-007

Recently, IKEYCUTTER CONDOR XC-007 has been gradually becoming the most popular key cutting machine in the mark, Aobd2shop included. Its popularity mainly contributes to its advanced software and precised mechanism.

Now here share with you “how to program a key with IKEYCUTTER key cutting machine”, all four ways are listed below:

1. If you know the key toothed code, you can simply use “Toothed code processing” function and enter Key billet selection interface to create a new key;

2. If you know the brand of the key, you can use “Key Database” function by going to the vehicle selection interface to make a new key;

3. If you have an original key, things would be much easier. You can simply use “key copy” function and choose manufacturer to match a new key.

4. If you know a part of the Key toothed code, you can use “Missing teeth inquiry” function and enter Key embryo selection interface to program a new key.

Product Link:
http://www.aobd2shop.com/wholesale/ikeycutter-condor-xc007-master-series-key-cutting.html

SKP900 Key Programmer Update to New V2.9

SKP-900 key programmer has newly updated to V2.9 New V2.9 SKP900 enjoys following features.:
1. LINCOLN MKZ Smart Key Program 2010-2014
2. LAND ROVER Range Rover Add system update 2013-2014 (repaired the bug that keyless entrance can only work within short distance)
3. LAND ROVER Range Rover sport Add system update2013-2014 (repaired the bug that keyless entrance can only work within short distance)
4. Fiat 500 Remote Key Program 2011-
5. Porsche Cayenne Read PIN Code and Remote Key Program 2004-
6. Porsche Cayenne Read PIN Code and Remote Key Program 2006- (can only read PIN code for some models)
7. Add menu LINCOLN Key Program with HEC ID-4C (1999-2004)
8. Add menu LINCOLN Key Program with PCM ID-4D (2002-2004)

How to update SKP900 key programmer to V2.9:
Download Update Tool and Update File:
1) Register in SKP900 official website: http://www.superobd.com
2) Enter the register membership information
3) Download the V2.9 Update File to your computer
4) Unzip the file to get the Update Bin File (Marked red picture below)

5) Connect SKP900 key programmer with computer via USB port
6) Run the update tool. Then click "OPEN" to open the Update Bin File.
7) Click "Auto Scan Port" to setup the COM Port.
8) Select "UPDATE" to start update.
9) When update procedure is complete, start to use the device or exit the program.

NOTE: Do not disconnect the SKP900 device during the update procedure.

GM Tech2 GM Diagnostic Scanner(Works for GM/SAAB/OPEL/SUZUKI/ISUZU/Holden)

GM Tech2 GM Diagnostic Scanner(Works for GM/SAAB/OPEL/SUZUKI/ISUZU/Holden)

Newly Updated V2.9 SKP-900 Key Programmer Highlights

Best quality SKP-900 is portable OBD2 key programmer rather than those with big size and heavy weight, its convenience is pursued by more and more people. Besides, some car key programmer only supports one car make, such as BMW AK500, while SKP- 900 key programmer supports almost all cars in the world, like Ford, Land Rover, Chrysler, Jeep, Toyota, Nissan, Honda, Kia and more.

SuperOBD SKP-900 Key Programmer V2.9 Highlights:
1. LINCOLN MKZ Smart Key Program 2010 -
2. LAND ROVER Range Rover Add system update 2013-2014 (repaired the bug that keyless entrance can only work within short distance)
3. LAND ROVER Range Rover sport Add system update 2013-2014 (repaired the bug that keyless entrance can only work within short distance)
4. Fiat 500 Remote Key Program 2011 -
5. Porsche Cayenne Read PIN Code and Remote Key Program 2004-
6. Porsche Cayenne Read PIN Code and Remote Key Program 2006- (can only read PIN code for some models)
7. Add menu LINCOLN Key Program with HEC ID-4C (1999-2004)
8. Add menu LINCOLN Key Program with PCM ID-4D (2002-2004)

Package including:
1pc x SKP-900 Main Unit
1pc x OBD Adapter Cable
1pc x HY / KIA Adapter
1pc x KIA-20 Adapter
1pc x HONDA-3 Adapter
1pc x USB Cable
1pc x Manual

Product Link:
http://www.aobd2shop.com/wholesale/2014-new-arrival-superobd-skp-900-hand-held-obd2-auto-key-programmer-3731.html

How to disable DRLs with Volvo VIDA DICE

Daytime running lights or DRLs are the very important element that claim make driving safer. But on some occasions, having running lights makes viewing of a drive-in mode difficult when you need the air condition on, in this case, you have to turn them off depends on your vehicle type. The text below displays how to disable DRLs of Volvo vehicle models.

Tool:

Volvo VIDA DICE 2014a

A laptop running windows 7 operating system (ONLY)

Here we go:

1) Insert the Volvo vida dice CD software on to the laptop and install the software, here is a software installation video guide for you to refer: https://www.youtube.com/watch?v=fE_129l01Cs or you can get PDF user manual in aobd2shop webpage.

2) Enter vehicle model, type, year etc information to proceed

3) Connect the Volvo VIDA DICE unit into the OBD diagnostic socket

4) Select "DIAGNSOTIC" in the function menu.

The default setting is Flexnoll. Switch it to Flexstd and click program. Click "Programmed values" >> Daytime run-lights >> Flexstd

5) Select "Information" function option. Daytime running light (DRL box) is a light gray and inactive. You can check the DRL status. Click "Start programming" to disable daytime running lights.

6) If you need to diagnose other ECU modules, back to the Diagnostic function interface. Otherwise, exit the program.

High Quality MDI Multiple for GM Wireless Diagnostic Interface with Wifi

High Quality MDI Multiple for GM Wireless Diagnostic Interface with Wifi

The Most Advanced VVDI 2.8.0 VAG Vehicle Diagnostic Interface

Almost a month, a new version for VVDI VAG vehicle diagnostic tool will be launched, which means that VVDI has constantly been improved so as to meet the demand of comprehensive users.

And now VVDI has been updated to the newest V2.8.0, here let’s come to the new features and functions of this diagnostic interface.

Newest VVDI 2.8.0 Advanced Features:
1. No need update firmware
2. Free for all user: decrypt Passat B6/CC comfort module dump, No need condor authorize
3. Add file prepare remote key
4. Update Immobilizer Data Tool: Support all cars from Asia and USA: Acura, Brilliance, Besturn, Chang An, Great Wall, Chery, Daewoo, Daihatsu, Geely, Haima, Honda, Hyundai, Infiniti, Isuzu, Kawasaki, Kia, Lexus, Mazda, Mitsubishi, Nissan, Proton, Roewe, Saipa, IKCO, SsangYong, Subaru, Suzuki, Tata, Toyota, Yamaha, Buick, Bombardier, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GMC, Jeep, Lincoln, Oldsmobile, Pontiac
5. Fix bug for learn immobilizer with CAN Instrument
6. Fix some bugs

VVDI 2.8.0 newly added functions:
1. Support NEC 24C32, NEC 24C64 change mileage through obd2, generate dealer's keys, read and write EEPROM and backup flash data.
2. Support GOLF5 MM7 (9S12) change mileage through obd2, generate dealer's keys, read and write EEPROM and backup flash data.
3. Add TA special chip pre-program. Directly pre-program ID48 to TA2, TA3, TA4, TA5 chips.

Product Link:
http://www.aobd2shop.com/wholesale/vag-commander-diagnostic-interface-vvdi.html