One of the Tacho Pro Kit users in the VW forum came across some difficulty with using the odometer correction tool.
Problem:. After complete install the Tacho Pro Kit V2.0 software on win xp mode, he connected the device with computer and plugged it into the diagnostic socket but to find that software was not compatible with the computer com port The windows pops out an error message reading: "The system can not open COM2 port requested by the application Choose 'Close' to terminate the application." (shown as the picture below)
Aobd2shop engineer analyzed and kindly offers the solution.
The question was that the user connect the device with none com port computer via USB cable. He should change another computer with com port via com cable in the package.
Tacho Pro Kit V2.0 Software Install Tips:
1. The Tacho Pro software might not work on PC`s that are faster than 233 MHZ.
2. Interface electronic of the Tachopro & K / L is the same, only tachoPro have the dongle inside.
3. Make sure using the Tacho pro Software under PLAIN DOS only not under windows or a windows command shell
1. The Tacho Pro software might not work on PC`s that are faster than 233 MHZ.
2. Interface electronic of the Tachopro & K / L is the same, only tachoPro have the dongle inside.
3. Make sure using the Tacho pro Software under PLAIN DOS only not under windows or a windows command shell
No comments:
Post a Comment